Welcome to busware.de

We hope to make this an interesting place for those looking after innovative and cool but affordable hardware solutions, which will be supplied as OPEN HARDWARE for any OPEN SOURCE firmware you may write.
We are not selling ready-to-use endcustomer-products. We just supply you with pieces of hardware and accessories making your open source development even more exciting.
Once you finish writing your killer firmware we can offer you high volume production or you may just licence our designs to receive full production data.

News

• 2024-02-01 - ZUL - ESP32 interface to CC2652R Zigbee transceiver running Z-stack for zigbee2mqtt gateways
• 2024-01-25 - CUN - ESP32 interface to common CC1101 radio incl. Atmel co-processor providing USB and BT/WLAN gateway capabilities
• 2023-12-15 - TUL - Onsemi NCN5130 KNX transceiver meets ESP32 providing USB and WLAN gateway capabilities
• 2022-10-03 - EUL - new EnOcean? transceiver TCM515 meets ESP32 providing USB and WLAN gateway capabilities
• 2021-08-03 - CULP - refurbished CUL with Raspberry Pico RP2040 processor
• 2021-07-10 - DULP - DALI bus to USB interface - based on Raspberry Pico RP2040 processor
• 2021-07-01 - TULP - a remake of TUL (TPUART) KNX bus interface - now based on Raspberry Pico cpu
• 2021-05-25 - BEUL - CC2652R based Zigbee USB stick for Z-Stack?
• 2021-05-10 - RTUL - Realtime clock as USB stick
• 2021-02-19 - HMUL - Homematic RF module carrier for USB access
• 2019-07-20 - KNX/EIB module for M5Stack? series based on TPUART2
• 2019-07-18 - Watch, extension, DIN rail and GoPro-alike? enclosures w/ mount for M5Stack? series
• 2019-07-11 - LoRa 868MHz module for M5Stack? series
• 2018-02-09 - Pigator-Module-Adapter NMC2 prototype featuring ESP32-SoC connectivity
• 2017-12-11 - WiTally - The WiFi-Tally-light? with battery, accelerometer and magnentometer
• 2017-11-29 - HOC - Homematic-Onewire-Clock? extension for Raspberry
• 2017-05-24 - rolling out LUW - the LoRa-USB-WLAN? stick
• 2017-05-10 - prototyping TUI - the universal interface from USB, LAN or WLAN to KNX/EIB by TPUART2
• 2017-03-23 - prototyping LUW - LoRa-USB-Light? - a single channel LoRaWAN? gateway with WiFi? uplink
• 2017-02-22 - moving forward into LoRaWAN developments
• 2017-01-19 - BLE/iBeacon scanner has been successfully prototyped
• 2016-12-14 - TuxRadio version 4 has been successfully prototyped
• 2016-11-28 - first functional TBL - TPUART Bluetooth Light - setup
• 2015-09-17 - single PIGATOR module host plus Onewire & RTC for Raspberry Pi in a DIN rail enclosure == POD
• 2015-04-23 - introducing RF69 USB stick - a RFM12B and Arduino Leonardo compatibe radio transceiver
• 2015-01-15 - sucessfully tested first PIGATOR modules and carriers
• 2014-11-07 - prototyping NMC - a networked module carrier
• 2014-10-27 - TuxRadio version 3 has been successfully prototyped
• 2014-07-03 - first prototypes of TRR - KNX/EIB-TPUART with RTC on DIN-rail for Raspberry Pi
• 2014-05-21 - a prototyping- or just distance extension EXP - to mix COC and SCC for RPi
• 2014-04-16 - first prototypes of LUX - 18bit, up to 260k lx brightness sensor with battery, USB and CC1101 radio
• 2014-04-05 - first prototypes of IRH - a miniature Infrared Reading/writing Head for smart meters with magnetic front, direct microUSB and CC1101 radio inside
• 2014-02-04 - testing on first 3D-printed prototypes of RXR - Raspberry Xtension Ring
• 2014-01-16 - finished design of sandwich ring to cover multiple extensions i.e. SCC - Stackable CC1101 transceiver inside a enclosure w/ RPi
• 2013-12-07 - prototyping SCC - Stackable CC1101 transceiver
• 2013-11-04 - prototyping an isolated RS485-USB-Stick: RUX - with fast and freely programmable ATXMEGA processor
• 2013-07-24 - prototyping RPi-CAD extension - an I2S-HD-audio? (96kHz/24bit) extension with TFT/Touch-display, IR receiver and RTC for Raspberry Pi
• 2013-07-19 - prototyping RPi-CCD extension - 2.8" color TFT-Display combined with touchscreen, 868MHz radio transceiver and real time clock for Raspberry Pi
• 2013-07-13 - started firmware for FT1.2 protocol support on TUL USB device - so ETS can directly use it.
• 2013-07-10 - First devices can "bootload" alternative firmware by using Dudette-bootloader
• 2013-05-29 - The Arduino CSM-Shield is now available in our shop
• 2013-04-29 - first prototypes of 6 channel HiPower-LED driver for DIN rail built
• 2013-04-22 - first prototypes of Ceiling Sensor Board built
• 2013-04-19 - ported Debian Wheezy and Linux 3.8.7 with FHEM 5.3 to TuxRadio
• 2013-04-04 - first prototypes of CSM-Shield for Arduino built
• 2012-10-25 - all our money transfer invoices now include a BezahlCode for ease of entering bank information and values
• 2012-10-15 - prototyping on RPi-SD0 extension - interfacing 4 channels S0 & 1 channel D0 of smart meters for Raspberry Pi
• 2012-10-13 - prototyping on RPi-ROT extension - mainly a Onewire & KNX/EIB extension for Raspberry Pi
• 2012-09-28 - RPi-COC extension is now available in our shop
• 2012-08-19 - Start of designing COC extension for Raspberry Pi (RTC, CC1101, EEPROM, OneWire)
• 2012-07-22 - Started some facebook pages: http://www.facebook.com/busware
• 2012-06-01 - first imx233-based busser TUX prototype
• 2012-03-22 - first busser TUX prototype
• 2012-03-13 - HUL now shipping: 802.15.4 based HF-frontend @ 868MHz to run Contiki OS
• 2012-03-02 - Field testing RPL (mesh) routing capabilities of Contiki OS-based devices
• 2012-01-27 - HexaBus compliant, AT86RF212-based USB stick and IP65 switch w/ energy measurement
• 2012-01-21 - a lighter hardware version (less RAM) of CUL, called V4, is now available in our shop
• 2012-01-19 - RFM12B USB sticks are now available
• 2012-01-13 - CUNO 433MHz is available
• 2011-09-12 - first NUX prototype
• 2011-09-05 - all our development and designing is done on Macintoshes, thank you Steve!
• 2011-09-16 - CUNO V2.1
• 2011-08-29 - first Enocean-USB-light EUL prototype - TCM310 transceiver to USB interface
• 2011-07-11 - TUL is shipping
• 2011-05-19 - first TPUART-USB-light TUL prototype - a KNX/EIB to USB interface using standard TPUART
• 2011-04-16 - CULM prototyping
• 2011-03-31 - CC1101-Hand-Sender (CHS) - V2 prototyping
• 2011-03-23 - TuxRail - V2 prototyping
• 2010-11-27 - TuxRadio - prototyping
• 2010-11-22 - CUNO - is shipping
• 2010-10-10 - CUNO - prototyping
• 2010-10-07 - LUFA is now supporting CUL by BOARD=CULV3 definition
• 2010-09-29 - CUL models V3.2 are out.
• 2010-09-09 - busware.de got assigned its own Organizationally Unique Identifier (OUI) - A4-50-55
• 2010-08-15 - busware.de is now IPv6 accessible ...
• 2010-07-10 - TuxRail prototyping
• 2010-05-18 - CC1101-Serial-modules CSM are now available in our shop
• 2010-04-26 - bitbridge prototypes ready for testing
• 2010-04-19 - CUL version 3 is shipping
• 2010-03-30 - Version 3 prototype of 4S0ETH - known as kWh-Logger. Now operated by a real embedded linux (AVR32 or ARM9-G45).
• 2010-03-17 - First prototypes of CC1101 modules with m324 processors
• 2009-10-28 - Busware-USB-Interface BUI has been prototyped - running as AVRISPmkII clone
• 2009-10-19 - CC110x-USB-Network CUN modules are now available in our shop
• 2009-09-17 - first release of EtherSex-based firmware for S0-datalogger 4S0ETH-module
• 2009-09-04 - last round prototyping the CC1101 with Ethernet CUN
• 2009-08-19 - AT86RF212 based USB-Sticks: RF212USB are available in our shop
• 2009-06-20 - Freebus-USB-light FUL modules are now available in our shop
• 2009-06-17 - CUL 433MHz modules are now available in our shop
• 2009-06-12 - Speeding up development with our new Essemtec EXPERT half-automated Pick&Place machine
• 2009-05-24 - The CC1101 module with optional processor CPM is now available in our shop
• 2009-05-15 - CUL V2X modules are now available in our shop
• 2009-03-27 - prototyping von FPM - a AVR-based DIL24 bus coupler for Freebus
• 2009-03-06 - first PMF-S - "Pimp my Funksteckdose" prototype
• 2009-02-20 - re-designing CUL - What is new?
• 2009-02-05 - finish prototyping on FUL a USB to Freebus coupler
• 2009-02-01 - designing CSM - an universal CC1101-based RF-2-UART with LevelShifter?
• 2009-01-30 - prototyping on 4S0ETH (4 channel S0-to-Ethernet? bridge) - see Image Gallery
• 2009-01-26 - designing Freebus-USB-Lite FUL module
• 2009-01-22 - designing 4 channel S0 module with PoE-Ethernet? and 1wire interface
• 2009-01-19 - prototyping on CPM (universal CC110x-Processor-Module) - see Image Gallery
• 2008-10-27 - First CPC installation in Thailand - Image Gallery
• 2008-10-09 - prototyping on CPC - CC110x-based pool control
• 2008-10-08 - DCUN (Dual CC1101 USB & Network) prototyping
• 2008-09-30 - some CUL modules are now available in our shop
• 2008-09-15 - start prototyping a 433MHz-CUL version - read the details
• 2008-09-08 - finished redesign of CUR prototype - read the details
• 2008-09-03 - CC1101-USB-Remote CUR prototype
• 2008-09-01 - CC1101-USB-Light CUL module now in production
• 2008-08-24 - final on CUL module