News
Product announcements and milestones since 2008.
- Free your HmIP-RFUSB stick from the CCU - unmodified, wireless, anywhere in the house - see https://github.com/tostmann/RFNETHM
- turn any ESP32-C6 into a Zigbee coordinator for Zigbee2MQTT - Massive Node Capacity - +20dBm power
- launched web-based Config, Test and Flashing Tool for CUL hardware - no terminals or dfu tools required anymore
- added KNX/IP support to TUL - making it a standalone WiFi-KNX-coupler
- launched busser.io website - dedicated to busware blocks and bases
- busware IO-blocks to fit regular Wisblock system - available for KNX, Enocean, Zigbee and CC1101
- ZUL - ESP32 interface to CC2652R Zigbee transceiver running Z-stack for zigbee2mqtt gateways
- CUN - ESP32 interface to common CC1101 radio incl. Atmel co-processor providing USB and BT/WLAN gateway capabilities
- TUL - Onsemi NCN5130 KNX transceiver meets ESP32 providing USB and WLAN gateway capabilities
- EUL - new EnOcean transceiver TCM515 meets ESP32 providing USB and WLAN gateway capabilities
- CULP - refurbished CUL with Raspberry Pico RP2040 processor
- DULP - DALI bus to USB interface - based on Raspberry Pico RP2040 processor
- TULP - a remake of TUL (TPUART) KNX bus interface - now based on Raspberry Pico cpu
- BEUL - CC2652R based Zigbee USB stick for Z-Stack
- RTUL - Realtime clock as USB stick
- HMUL - Homematic RF module carrier for USB access
- KNX/EIB module for M5Stack series based on TPUART2
- Watch, extension, DIN rail and GoPro-alike enclosures w/ mount for M5Stack series
- LoRa 868MHz module for M5Stack series
- Pigator-Module-Adapter NMC2 prototype featuring ESP32-SoC connectivity
- WiTally - The WiFi-Tally-light with battery, accelerometer and magnentometer
- HOC - Homematic-Onewire-Clock extension for Raspberry
- rolling out LUW - the LoRa-USB-WLAN stick
- prototyping TUI - the universal interface from USB, LAN or WLAN to KNX/EIB by TPUART2
- prototyping LUW - LoRa-USB-Light - a single channel LoRaWAN gateway with WiFi uplink
- moving forward into LoRaWAN developments
- BLE/iBeacon scanner has been successfully prototyped
- TuxRadio version 4 has been successfully prototyped
- first functional TBL - TPUART Bluetooth Light - setup
- single PIGATOR module host plus Onewire & RTC for Raspberry Pi in a DIN rail enclosure == POD
- introducing RF69 USB stick - a RFM12B and Arduino Leonardo compatibe radio transceiver
- sucessfully tested first PIGATOR modules and carriers
- prototyping NMC - a ===n===etworked ===m===odule ===c===arrier
- TuxRadio version 3 has been successfully prototyped
- first prototypes of TRR - KNX/EIB-TPUART with RTC on DIN-rail for Raspberry Pi
- a prototyping- or just distance extension EXP - to mix COC and SCC for RPi
- first prototypes of LUX - 18bit, up to 260k lx brightness sensor with battery, USB and CC1101 radio
- first prototypes of IRH - a miniature ===I===nfrared ===R===eading/writing ===H===ead for smart meters with magnetic front, direct microUSB and CC1101 radio inside
- testing on first 3D-printed prototypes of RXR - Raspberry Xtension Ring
- finished design of sandwich ring to cover multiple extensions i.e. SCC - ===S===tackable ===CC===1101 transceiver inside a enclosure w/ RPi
- prototyping SCC - ===S===tackable ===CC===1101 transceiver
- prototyping an isolated RS485-USB-Stick: RUX - with fast and freely programmable ATXMEGA processor
- prototyping RPi-CAD extension - an I2S-HD-audio (96kHz/24bit) extension with TFT/Touch-display, IR receiver and RTC for Raspberry Pi
- prototyping RPi-CCD extension - 2.8" color TFT-Display combined with touchscreen, 868MHz radio transceiver and real time clock for Raspberry Pi
- started firmware for FT1.2 protocol support on TUL USB device - so ETS can directly use it.
- First devices can "bootload" alternative firmware by using *Dudette*-bootloader
- The Arduino CSM-Shield is now available in our shop
- first prototypes of 6 channel HiPower-LED driver for DIN rail built
- first prototypes of Ceiling Sensor Board built
- ported Debian Wheezy and Linux 3.8.7 with FHEM 5.3 to TuxRadio
- first prototypes of CSM-Shield for Arduino built
- all our money transfer invoices now include a BezahlCode for ease of entering bank information and values
- prototyping on RPi-SD0 extension - interfacing 4 channels S0 & 1 channel D0 of smart meters for Raspberry Pi
- prototyping on RPi-ROT extension - mainly a Onewire & KNX/EIB extension for Raspberry Pi
- RPi-COC extension is now available in our shop
- Start of designing COC extension for Raspberry Pi (RTC, CC1101, EEPROM, OneWire)
- Started some facebook pages: http://www.facebook.com/busware
- first imx233-based busser TUX prototype
- first busser TUX prototype
- HUL now shipping: 802.15.4 based HF-frontend @ 868MHz to run Contiki OS
- Field testing RPL (mesh) routing capabilities of Contiki OS-based devices
- HexaBus compliant, AT86RF212-based USB stick and IP65 switch w/ energy measurement
- a lighter hardware version (less RAM) of CUL, called V4, is now available in our shop
- RFM12B USB sticks are now available
- CUNO 433MHz is available
- CUNO V2.1
- first NUX prototype
- all our development and designing is done on Macintoshes, thank you Steve!
- first Enocean-USB-light EUL prototype - TCM310 transceiver to USB interface
- TUL is shipping
- first TPUART-USB-light TUL prototype - a KNX/EIB to USB interface using standard TPUART
- CULM prototyping
- CC1101-Hand-Sender (CHS) - V2 prototyping
- TuxRail - V2 prototyping
- TuxRadio - prototyping
- CUNO - is shipping
- CUNO - prototyping
- LUFA is now supporting CUL by *BOARD=CULV3* definition
- CUL models V3.2 are out.
- busware.de got assigned its own Organizationally Unique Identifier (OUI) - A4-50-55
- busware.de is now IPv6 accessible ...
- TuxRail prototyping
- CC1101-Serial-modules CSM are now available in our shop
- bitbridge prototypes ready for testing
- CUL version 3 is shipping
- Version 3 prototype of 4S0ETH - known as kWh-Logger. Now operated by a real embedded linux (AVR32 or ARM9-G45).
- First prototypes of CC1101 modules with m324 processors
- Busware-USB-Interface BUI has been prototyped - running as AVRISPmkII clone
- CC110x-USB-Network CUN modules are now available in our shop
- first release of EtherSex-based firmware for S0-datalogger 4S0ETH-module
- last round prototyping the CC1101 with Ethernet CUN
- AT86RF212 based USB-Sticks: RF212USB are available in our shop
- Freebus-USB-light FUL modules are now available in our shop
- CUL 433MHz modules are now available in our shop
- Speeding up development with our new Essemtec EXPERT half-automated Pick&Place machine
- The CC1101 module with optional processor CPM is now available in our shop
- CUL V2X modules are now available in our shop
- prototyping von FPM - a AVR-based DIL24 bus coupler for Freebus
- first PMF-S - "Pimp my Funksteckdose" prototype
- re-designing CUL - What is new?
- finish prototyping on FUL a USB to Freebus coupler
- designing CSM - an universal CC1101-based RF-2-UART with LevelShifter
- prototyping on 4S0ETH (4 channel S0-to-Ethernet bridge)
- designing Freebus-USB-Lite FUL module
- designing 4 channel S0 module with PoE-Ethernet and 1wire interface
- prototyping on CPM (universal CC110x-Processor-Module)
- First CPC installation in Thailand
- prototyping on CPC - CC110x-based pool control
- DCUN (Dual CC1101 USB & Network) prototyping
- some CUL modules are now available in our shop
- start prototyping a 433MHz-CUL version
- finished redesign of CUR prototype
- CC1101-USB-Remote CUR prototype
- CC1101-USB-Light CUL module now in production
- final on CUL module